 ThuisProduct ListPolymeer lithium-ionbatterijpak60-serie LFP cilindrische lithium-ionbatterijenLifepo4 F603200C-100Ah-batterijen met hoge vergroting voor back-upvoeding voor communicatiebasisstation

Contacteer Leverancier

Mr. Rees

Laat een bericht achter

contact opnemen

Je mag het leuk vinden

Reservebatterij basisstation F602000C-50Ah 60-serie LFP cilindrische lithium-ionbatterij contact opnemen

Power-batterij met lage interne weerstand 60-serie F602000C-50Ah voor power-batterijbank contact opnemen

Krachtige 60-serie F602000C-50Ah-batterij voor auto met stroomaccu contact opnemen

60-serie Cylindrica lifepo4 F603200C-100Ah-batterijen voor energieopslagbatterij contact opnemen

Lange levensduur 60-serie Cylindrica F603200C-100Ah lifepo4-batterijen voor energie-opslagbatterij contact opnemen

Lifepo4 F603200C-100Ah-batterijen met hoge vergroting voor back-upvoeding voor communicatiebasisstation contact opnemen

Lange levensduur Cylindrica lifepo4 F603200C-100Ah-batterijen uit de 60-serie voor power-accubank contact opnemen

In de fabriek aangepaste 72V lifepo4-batterij vervangbaar voor RV-batterij contact opnemen

 

Lifepo4 F603200C-100Ah-batterijen met hoge vergroting voor back-upvoeding voor communicatiebasisstation

Ontvang de meest recente Prijs

Min. orde:

10000 Piece/Pieces

contact opnemen

Beschrijving

Productkenmerken
Verpakking & Levering

< >

Overview

Productkenmerken

Model: 60 series F603200C-100Ah

Verpakking & Levering

Verkoopeenheden:: Piece/Pieces

Afbeeldingsvoorbeeld:

Lifepo4 F603200C-100Ah- batterijen met hoge vergroting voor:

Communicatie basisstation back-up voeding

60 1

603200c 2

Bas ic Prestatie

No.	Item	Specification
1	Nominal Capacity	100Ah ,0.5 C discharging（25±2℃）
2	Nominal Voltage	3.2V
3	Charge Ending Voltage	3.65V
4	Discharge Ending Voltage	2.5V（≥0℃） 2.0V（< 0℃）
5	Standard Charging Method	25±2℃ 0.5C constant current charge to 3.65V, then constant voltage 3.65V charge till charged current declines to ≤ 0.05C
6	Standard Discharging Method	25±2℃ 0.5C constant current discharge to 2.5V
7	Max.Pulse Charging Current	1.5C (15℃～45℃, 50%SOC) ≤30S
8	Max.Pulse Discharging Current	2C (15℃～45℃, 50%SOC) ≤30S
9	Operating environment	Charging: -0℃-55℃, max.90%RH Discharging: -20℃-55℃, max.90%RH
10	Impedance	＜0.6mΩ
11	Cell Weight	1.90kg±0.20kg
12	Mass Energy Density	168Wh/Kg
13	Volume Energy Density	364Wh/L

Elektrische kenmerken:

NO.	Item	Criterion	Test Method
1	0.5C discharging capacity	Discharging capacity is not less than normal capacity.	After Standard Charging, rest 5 minutes ,then 0.5C discharge to ending voltage.
2	Room temperature 1C discharging capacity（initial capacity）	Discharging capacity must be not less than nominal capacity and no more than 110% nominal capacity. Range：≤5% the average of initial capacity	After the cell is charged with 1C，and then discharge it to 2.5V with 1C.Repeat 5 times（If the range of capacity is no more than 3% nominal capacity and sustains 3 times，stop the test early）,average the last three. 1C
3	Standard cycle life	Discharging capacity is not less than 80% initial capacity when have cycled 2000 times	Test condition: 25±2℃ Charge：1C to 3.65V, then constant voltage 3.65V charge till charged current declines to ≤ 0D.i0s5cCharge：1C to 2.5V When the discharge capacity reduced to 80% of rated capacity, Stop testing
4	Ratio discharging capacity	Discharging capacity should be not less than 90% initial capacity	After the cell is charged with 1C，and then discharge it to 2.5V with 3C.Compare with the initial capacity.
5	Ratio charging performance	Discharging capacity should be not less than 80% initial capacity	After the cell is charged with 2C，and then discharge it to 2.5V with 1C。Compare with the initial capacity.
6	Low temperature discharging capacity	Discharging capacity should be not less than 70% initial capacity	After the cell is charged with 1C，keep the cell at -20℃±2℃ for 24 hours，and then discharge it to 2.0V with 1C at -20℃±2℃。Compare with the initial capacity.
7	High temperature discharging capacity	Discharging capacity should be not less than 90% initial capacity	After the cell is charged with 1C，keep the cell at 55℃±2℃ for 5 hours，and then discharge it to 2.5V with 1C at 55℃±2℃。Compare with the initial capacity.
8	Charge retention capacity and recovering capacity of room temperature	Charge retention capacity should be not less than 85% initial capacity ； recovering capacity should be not less than 90% initial capacity	After the cell is charged with 1C，keep the cell at room temperature for 28days ， and then discharge it to 2.5V with 1C at room temperature. Metering the charge retention capacity；Then the battery should be charged with 1C and should be discharged with 1C at room temperature. Metering the recovering capacity.
9	Charge retention capacity and recovering capacity of high temperature	Charge retention capacity should be not less than 85% initial capacity ； recovering capacity should be not less than 90% initial capacity	After the cell is charged with 1C，keep the cell at 55℃±2℃ for 7daysand rest 5h at room temperature，discharge it to 2.5V with 1C at room temperature. Metering the charge retention capacity ； Then the cell should be charged with 1C and should be discharged to 2.5V with 1C at room temperature. Metering the recovering capacity.
10	Appearance	The surface of cell should be dry and labeled clearly，and without burr ， scratch ， contamination，distortion， break and so on	Visual inspection
11	Polarity	The cell polarity should be labeled clearly and correctly	Measured with voltmeter
12	Dimension and Weight	The cell dimension and weight accord with stated value	Using measuring tools and electronic scale
13	Storage	Discharging capacity should be not less than 90% initial capacity	After the cell is charged with 1C，and then discharge it with 1C in 30min at room temperature. Keep the cell at 45℃±2℃for 28days and rest 5h at room temperature. Then the cell should be charged with 1C and should be discharged to 2.5V with 1C at room temperature. Metering the discharging capacity.

Omgevingskenmerken

NO	Item	Criterion	Test Method
1	Constant temperature and constant humidity test	No explosion，no fire， no leakage. Discharging capacity is not less than 85% initial capacity	After Standard Charging, test condition： Temperature：40±5℃ Relative Humidity：90~95%RH Storage Time：48 hours Then return to room temperature for 2 hours， Then 0.5C discharged to ending voltage.
2	Vibration test	No explosion, no fire，no Leakage	After Standard Charging ， fixed the cell to vibration table, then subjected to vibration testfor 30 minutes per axis of XYZ axes. Frequency rate：1oct/min Vibration frequency：10Hz-30Hz Excursion (single amplitude)：0.38mm Vibration frequency：30Hz-55Hz Excursion (single amplitude)：0.19mm
3	Shock test	No explosion, no fire，no leakage	After Standard Charging，test condition： Acceleration：100m/s2 Pulse lasting time：<16ms Shock times：1000±10 times

Veiligheidskenmerken

1	Overcharge test	No explosion，no fire	After the cell is charged with 1C ， test condition： Charge : 1C to 5.475V When the voltage get to 5.475V or charge for 60 min ,Stop testing and observe 1h.
2	Over-discharge test	No explosion，no fire，no leakage	After the cell is charged with 1C，discharge 90 min at 1C，stop testing and observe 1 h.
3	Short-circuit test	No explosion, no fire	After the cell is charged with 1C，Short circuit the positive and negative 10 min，and the resistance of the external line is not more than 5mΩ，Stop testing and observe 1h.
4	Free fall test	No explosion，no fire，no leakage	After the cell is charged with 1C，the positive and negative terminal face down，and then cell falls freely from the height of 1.5m down to the cement floor，and observe 1h.
5	Heating test	No explosion, no fire	After the cell is charged with 1C，Put cell into a hot box. Test condition: Temperature rate ：5℃ /min Ending temperature :130℃±2℃ Keep temperature for 30 minutes ,then stop testing and observe 1 h.
6	Crush test	No explosion, no fire	After the cell is charged with 1C，fixing the cell. Test condition: Direction of extrusion：perpendicular to the pole piece Crushing speed：（5±1）mm/s Crushing plate：A half cylinder with a radius of 75mm，longer than the cell When the voltage reach 0V or eformation get to 30% or extrusion force get to 200kN，stop testing and observe 1 h.
7	Seawater immersion test	No explosion, no fire	After the cell is charged with 1C，put the cell into seawater or saltwater. Test condition: Concentration：3.5% NaCl After 2 h，stop testing and observe 1 h.
8	Temperature cycling test	No explosion，no fire，no leakage	After the cell is charged with 1C，put the cell into a High-low Temperature Chamber. Test condition： First stage ： decrease the temperature from 25℃ to -40℃ Decrease temperature time：60min Holding time：90min Second stage ： raise the temperature from -40℃ to 25℃ Raise temperature time：60min Third stage：raise the emperature from 25℃ to 85℃ Raise temperature time：90min Holding time：110min Forth stage ： decrease the temperature from 85℃ to 25 Decrease time：70 min Change the temperature from the first stage to the forth stage and cycle five times，then stop testing and observe 1 h.
9	Low pressure test	No explosion，no fire，no leakage	After the cell is charged with 1C，put the cell into a Vacuum Chamber. Test condition： Pressure：11.6 kPa Temperature：room temperature Time：6h then stop testing and observe 1 h.
Note: Above testing of safe characteristics must be with protective equipment.

60 3

A0d111d7901499d6c8253dcee8

Huachuang Times is een geavanceerd batterijtechnologiebedrijf in China, dat zich richt op R&D en productie op het gebied van kleine batterijen, en erop staat wetenschap en technologie als voorloper te nemen, gericht op producten en gericht op klanten.
Het bedrijf heeft een technologiecentrum en een postdoctoraal wetenschappelijk onderzoeksstation opgericht en heeft een aantal nieuwe onderzoekscentra voor energie opgericht in samenwerking met belangrijke nationale universiteiten en het Institute of Chinese Academy of Sciences. Het mechanisme voor wetenschappelijk onderzoek en innovatie is volwassen en volledig. Als een bedrijf met een sterke wetenschappelijke en technologische sterkte op het gebied van batterijen in China, zal het zich inzetten om gebruikers stroomproducten en -diensten te leveren met gloednieuwe technologie en ervaring.
Tegenwoordig zijn de producten van het bedrijf verkocht aan meer dan 60 landen en regio's op vijf continenten in de wereld, wat de uitstekende kwaliteit van Chinese producten en de sterke charme van nationale ondernemingen voor de consument volledig aantoont.

Gao Gnogchang

Product Categorie : Polymeer lithium-ionbatterijpak > 60-serie LFP cilindrische lithium-ionbatterijen

hete producten

E-mail naar dit bedrijf

*Onderwerp:
*Naar:

Mr. Rees
*E-mail:
*bericht:

Uw bericht moet tussen 20-8000 tekens